Jump to content

Peter Rejto

Basic Member
  • Posts

    86
  • Joined

  • Last visited

Everything posted by Peter Rejto

  1. Pinecone, I must be blind, but have searched high and low for Jimmy's guide on The Mooney Flyer site and a few recent back issues with no luck. Perhaps he isn't updating this any longer? Anyway, I hadn't realized that as an AOPA member I could use VREF for free! I have a better sense now of the current market value in the USA. Thanks all! Peter
  2. Thanks Art. I've written and will see what transpires. If anyone on the forum would be willing to look over the specs for my aircraft and give me a private opinion I'd be extremely grateful. emai: prejto at oberlin.edu Thanks!
  3. Is it appropriate to ask for help here in determining what a fair price in the USA might be for my N registered '78 M20J (which happens to be in Australia)? I've decided to sell this plane. Selling in Australia will likely require conversion to VH registry which is not inexpensive. So, the thought of returning it to the USA, or marketing it in the USA, has a certain appeal. I'm finding it quite hard to know what price it might bring. I won't post any details of the aircraft until I get some feedback as to whether asking for this help is okay! Thanks in advance! Peter
  4. Hello Trek, Carusoam suggested that you might offer an idea about an issue I have written about here (last two posts): https://mooneyspace.com/topic/41280-edmshadin-compatibility/#comment-744071

    Thanks in advance!

    Peter

  5. Yes, to a GTN650 and it works extremely well for routes and approaches. I would assume it would work with the G1000 but doesn’t work with “aviation out.” I forget the name of the new protocol. If the G1000 has that protocol I can’t see why it wouldn’t work. Peter
  6. Old post or not, it’s an interesting read. I have mechanical speed brakes in my J and have never had an issue since they were installed back in 1992....controlled by a lever near the trim wheel. Dead simple. Funny thing a few years ago during a BFR with an instructor not too Mooney experienced. I pulled on the speed brakes approaching the airport to more easily get slowed down and to get to pattern altitude.....and eventually I put down the gear. After the flight to instructor told me he was waiting for me to possibly forget the gear since I was somewhat below the gear down speed when I did activate the gear. I suppose that is something worth keeping a bit in mind. The speed brakes might somewhat mimic the feeling of the plane getting slow with the gear down. I think the feel is quite different as well as the sound (and of course, there is the normal gear warning horn). Still, perhaps worth keeping in mind? Peter
  7. I thought I’d give an update to this thread. Finally I was able to bring my plane back to Bankstown (YSBK) for the refitting of the Shadin Miniflo with a wiring diagram supplied to me by AERODAN (many thanks!). He obtained the diagram from JPI and it involved putting two diodes near the transducer. Seemingly all good! However, on an extensive recent trip (of over 30 hours) I discovered a very strange anomaly! I can’t make sense of it. When I’m navigating towards a user created waypoint (Gamin GTN650) the Shadin will not properly display the correct fuel to the destination waypoint while the EDM730 does. If I turn off the Shadin and restart it it will initially read the correct fuel to the waypoint and then progressively show a larger and larger discrepancy compared to the EDM730 as it correctly counts down. If I shut the Shadin down and restart it will then again show the correct required fuel but fail to count down properly. I should add that both units always agree on the actual fuel flow so it must have something to do with data coming from the GTN. This behaviour only (so far) has occurred with user waypoints and not waypoints contained in the GTN database. I can’t for the life of me make any sense of this.....too weird to be true? For the majority of my flights the two units agree very closely in terms of fuel flow and fuel to waypoint. Peter
  8. I've finished for the moment. I can't complete until I get a few additional fasteners from Skybolt. I think what I've got now is much better than before, but I guess there is only so much one can do with a 44 year-old cowling and 29 year-old paint job! I wasn't aware that the first 6 fasteners starting backwards from the prop (3 each side) need to be fully removed in order to fit. I found out the hard way. I may need to remove two more camlocs as getting the top cowling on now is proving harder than I like. For the moment I decided not to remove the painted grommets on the lower cowling.. I may change my mind about that. The nicest part of the repair was getting the two camlocs fixed in place on the bottom of the cowl near the nose gear. The holes are giant! Fortunately the kit contained two oversized camlocs. Even so I had to file out two thin washers to put on the inside of the cowling. With the extra washer the fit was very tight. I was just able to get the oversized retaining ring fitted. Hopefully these hold up!
  9. Thanks for all the tips. I have manages to pry off the lock rings....took a bit of fussing, but done. Then I discovered that the row of larger fasteners running over the top of the cowling all have very enlarged holes through the fiberglass such that the retaining ring would have no purchase. I've had to drill/file out a number of thin washers to put underneath the fiberglass so the lock ring will function. This job is a lot more labor intense than I imagined! I received a very curt unhelpful response from Skybolt. It appears so far that nobody there is willing to answer questions from a non-engineer sort of person (me!). My questions were straightforward enough but ignored (so far). Peter
  10. Is there a way to install the retaining ring on the camloc without the special tool shown in some videos? I did buy this tool (SK-T26) but I cannot get it to work for the smaller camlocs and the split ring retainer. The video on the Skybolt website shows it working with the washer type that holds the Camloc firmly in place. The videos I've looked at using a different tool seem to show that the center stud and one leg will fit and then the remaining leg is pushed/forced though the split ring. The retaining rings I was sent seem to be too small. i/e., the center stud will not go into the split ring center hole with one leg inserted. Also, what is the method for removing the grommet retaining ring for the larger camlocs short of buying the removal tool SK-T27? Thanks! Peter
  11. I don't have the IPC, but not sure that would help me now. I trusted Skybolt. I've written and I hope I can trust them to respond. In the meantime I've drilled out a couple of the dimpled washers and now they fit and look reasonable, but I can't see why I should need to do that. Anyway, I will update when I get some news, hopefully on Monday! P
  12. I just brought back a Skybolt kit from the USA for my 78 J. Maybe I'm just stupid but for the life of me I can't make sense of some of what I was sent. 1. The package included 3 different packs of flat head screws of different lengths. No idea what these may have to do with a 78 J cowling... 2. I need at least 14 SK28S3-5S and only received 10. Two of the camlocs work fine with the -6S size, but not the rest. 3. I was sent 25 DP1085-20SS dimpled washers. I cannot figure out how these fit to the SK28S3 series. Re the 4 camlocs just behind the spinner I had to use the old existing dimpled washers. I have not even started on the lower cowl yet. Maybe it will go better! Bad luck, or am I not seeing something obvious? Thanks! Peter
  13. Thank you! That's a good document to have on hand. I did install the HSR-83P plugs and they are performing very well. Peter
  14. Yes, for sure! But the bungee chords really saved me when I got stuck at an airport with no mechanics/shops open...
  15. Lots of great ideas here! What I like about the bungee chords: 1. Easy to carry around. 2. springy and flexible so that helps when raising the cowling up. 3. Numerous places to hook on when lowering the cowling. Nothing to cut like safety wire. 4. Very easy to attach to cowling after removing rubber coating from hooks. The foam is just to keep the bottom of the cowling from getting scratched up...light weight so hardly counts weight wise in the baggage area.
  16. Maybe this is old news....I'm not sure how most of you might do this - but, a few months ago I came up with this dead easy way to remove the lower cowling using 4 bungee chords and some soft foam support. I carry these in the plane just in case. Recently they were a life saver when I had to change a lower plug after the engine failed a mag test and forced an overnight. Saturday night, of course, so the airport was deserted on Sunday morning. I was actually able to get to the lower plugs with the lower cowling just hanging off the bungee chords! The only caution is to be super careful not to put any pressure on the fuel injector lines! Peter
  17. I received the fuel control unit back a few days ago and it's finally installed. The shop said there were probably 7 minor things wrong with it that would have a big combined influence on low rpm operations. The bill was "lovely" as they always are....However, after a few very minor adjustments to idle mixture and low idle rpm, all seems good. The weather is poor so I am unsure just when I can properly test all in flight. Peter
  18. I was asked earlier if there was something I could share here of interest from the AMPA discussion. With permission a statement from one of our most respected members: "Folks who are planning to branch out into aircraft design and manufacturing should bear in mind that this item under discussion (despite its name) is NOT a spring. Its function has nothing to do with its "springiness". It is a uni-directional torque translator. It allows torque to pass in one direction from the motor and manual actuator to the extension mechanism but just free-wheels in the other direction. Its function depends on the slight reduction in diameter when it is "tightening" and expansion when it is turning in the other direction. The key is the phrase "no back" in the name." Peter
  19. I'm kind of a newish member here at MooneySpace. I'm really off put and dismayed to read the personal attacks going on here. These all seem childish, unnecessary, and ultimately pointless....unless the point is to make other members "afraid" to post lest they be attacked in the same way. This thread is both important and interesting. In Australia, on the AMPA forum, a similar discussion started almost exactly at the same time. I'm happy to report that it is quite civilized and has a lot of good information. Unfortunately I cannot provide a link as it is a "AMPA members only" forum. Peter
  20. A small update. The fuel control unit was pulled out and shipped off to Brisbane. The shop called and said they found at least seven small things that together would explain my problems with overly rich idle and impossible hot starts. Hopefully I will have it back by the end of next week. Peter
  21. Thanks all for the replies! After an "eventful" day in Sydney with a mechanic it appears that I will need to remove the fuel servo for inspection, possible OH, and seal replacement. Unfortunately it wasn't possible to just leave the plane so I'm back home to a rather remote area where mechanics are far and few. I've got a few things to sort out (none easy) to get this issue rectified that's for sure! Peter
  22. My EDM-830 has a digital tach. Is it not accurate enough? In fact it's the recent EDM installation that has led to this observation (a "caution" warning from Savvy)
  23. I'm impressed by your searching skills! That is useful, I believe, as it seems the HSR 83P is crossed to the RHM38P (p for platinum dual electrode). I'm already using the RHM38E (massive) so I think these would be compatible. Thank you, and for your tip on Prop gov adjustment! Actually I have a question. If I'm departing a field at 2,000' full power isn't the same as full at sea level. Is the technique accurate in that circumstance? Thanks!
  24. Wow, Thanks so much for the great replies! All very useful. Okay, I may have been totally unclear about the plugs(?). I have 4 new AC HSR 83P fine wires going to waste. I know AC went out of business thanks to Champion. My question is are these compatible with my IO-360A3B6. I'm pretty sure many years ago I ran them in my J which at the time was the A3B6D. But, I can no longer find a cross reference. I intend to order new Tempest fines for at least the bottom plugs, but it's going to take a while for these to arrive in Australia. I was/am hoping the HSR-83Ps might tide me over. Anyone know? Thanks!
  25. A couple of issues have been revealed after installation of an EDM-830. 1. My prop gov needs adjusting down 50 RPM as tach is showing 2750 on takeoff. 2. My mixture appears to be too rich. I cannot idle slower than around 850 RPM full rich. If I slowly lean it will rise to 1150 RPM and then quit. Am I correct that the rise should be more in the range of 20-50 RPM (at ~700 RPM)? Currently if I pull the throttle all the way out, full rich, the engine goes to around 300 RPM and then dies. So, I also may have a throttle cable adjustment to do, or perhaps if the mixture is corrected not? 3. My plugs need servicing/replacement. I have a set of 4 fine wires but they are the old AC HSR 83P. I cannot find a cross reference to Champions. If my memory is correct many years ago I ran these in my J but I want to be certain these are not too hot or just the wrong plug. Thanks! Peter
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.