Jump to content

asaxet

Basic Member
  • Posts

    28
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Dallas
  • Reg #
    N21DD
  • Model
    M20E

Contact Methods

  • Yahoo
    asaxet@yahoo.com

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

asaxet's Achievements

Explorer

Explorer (4/14)

  • Dedicated
  • First Post
  • Collaborator
  • Conversation Starter
  • One Month Later

Recent Badges

10

Reputation

  1. IMHO install an engine monitor, (used works just as good as new) cht, egt for each cyl, oil temp... FF is a nice add if you can afford it... Read up on TBO and beyond @ Mikes, savy aviation site.... another perspective.....
  2. what level are you servicing the sump to.... On my 66e anything more than 5 quarts showing on the dip stick ends up on the belly in short order....
  3. Get the three blade... and put me first on the list of wanna buy your used B hub.... lol.... actually... really.... PM me if you decide to replace.... thx
  4. Im struggling to find an IPC for the 1976 M20F.. anybody got one they are willing to share... or a Part no for the PUSH to talk on the Pilots (left) yolk. Looking for a buddies bird... Thanks...
  5. I'm intrested, email me what you want for it.... asaxet@yahoo.com Thanks Art.
  6. Exactly the way my 66 is... kinda a pita when installing the engine monitor... starts on engine as AN4 fittings then down to AN2... took a while to order and install the 4 to 3 then sensor and 3 to 2 reducers....
  7. I bought my first single ownership bird a year ago.... 66 m20e.... after my first annual... I very happy with the manual gear, hyd flaps and over all simplicity of the Mooney.... 500 hrs this year. So one year in... short body vs long was a consideration at purchase... no issue... Fuel injection vs carb... still glad it’s FI. 200 vs 180hp , got 200. want more... happy but mo is better. No auto pilot... due to $$$ and down time, ended up with an Accutrac... its heaven after 8 months of IFR single pilot... No engine monitor.... added one, improved range... an safer operations all around. Fixes 1st year... Two mag rebuilds... Attitude gyro failed... replaced with a G5 interfaced to existing 430W... all three tires other additions, Added Stratus adsb in... and now prefer IFR with two iPads.... Next is to figure out what 2020 adsb out solution works for me.... and come up with cash for a flight stream 210.... Have fun looking.... then zero in on what you want/need and get serious about finding it.... perfect is hard to find... darn close can be good place to start... Just my expirence FWIW
  8. Didnt see you mention if you have a engine monitor... For my E.... as purchased jpI 450 fuel flow indicator and stock single cyl cht and egt. Never able to get very close to any poh numbers... Installed a new 4 cyl cht, egt, ff monitor and amazed how much better the range is now that better monitoring of what is going on with the engine is posible... and how much error there was with the originals.... unfortunatly it wont help your speed much... but definitely better range now... (and I haven’t gone gami yet.).. guessing it would be the same for a carb equipped bird... FWIW
  9. Looks like it will work on my E (based on comments above) .. I’m interested... at price point listed previous
  10. Manual gear.... Hyd flaps... crushing the Yellow.... keep it simple... affordable... and exciting .... LOL
  11. Lots of good advice above... My experience with the same issue on my bird.... Installed mid/low cost replacement LED bulbs in the existing wing sockets... no more trips... I did have an issue with the original single wire tail lite frying the led bulb... eventually added a grounding wire socket (grounded to rudder ) it did have a larger dome to accept the LED... and now have a continuous aft tail lite with a flasher ring.... perhaps a little added safety.... All purchased at Aircraft spruce... my bird is averaging 10 hours a week currently... this time of year a lot of lites on time.... (too many hours spent at the place paying for it all) again Just my experience...
  12. I am flying a 66e in to KDAL almost daily..... same -A1A and max fuel fuel burn for me is 18.... I’m guessing you need to sort out that sensor... was running a JPI 450... recent tally replaced with a cgr-30p... and sorting it out... about 4 days flying after install. 50 miles... running 25/25 @4000 ft I can lean to 9.5gph most days... maybe do the Gami gig next...
  13. Ill take one 531, both if your not willing to separate... 253 347 9 two two 3 ... call or text... let me know what owe... Thanks
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.