Jump to content

Barry LeBlanc

Basic Member
  • Posts

    73
  • Joined

  • Last visited

Everything posted by Barry LeBlanc

  1. Hi, Will Garmin now accept your modified Mooney and allow the Garmin Autopilot to be installed?
  2. Hi Paul, Glad you asked, the attached table has been updated to include your question. Thank You Barry Description of the proposed interface between the Garmin G1000 system and the 3100.pdf
  3. Hi, First of all, I was under the impression that the 3100 and the G1000 was tested with a Cessna A/C, I was wrong and do apologize for the misinformation. Below is from the design team. I am under a deadline and been granted till next Monday , July 8th, 2019 to come up with 7 to 8 more purchase orders, or my management will place the Mooney’s off the STC schedule. If you have any influence with the G1000 crowd, please ask them to act now. It is a short week. Please share and forward this information via email with your fellow G1000 owners. I have scuttled my vacation plans and working to contact every registered Mooney owner I can find. From now till Sunday you can reach me via email or cell: 940.327.0707 Have a great 4th. Thank You, Barry LeBlanc Genesys Aerosystems Regional Sales Manager M: 940.327.0707 Below is a description of the proposed interface between the Garmin G1000 system and the S.pdf
  4. Hi, First of all, I was under the impression that the 3100 and the G1000 was tested with a Cessna A/C, I was wrong and do apologize for the misinformation. Below is from the design team. I am under a deadline and been granted till next Monday , July 8th, 2019 to come up with 7 to 8 more purchase orders, or my management will place the Mooney’s off the STC schedule. If you have any influence with the G1000 crowd, please ask them to act now. It is a short week. Please share and forward this information via email with your fellow G1000 owners. I have scuttled my vacation plans and working to contact every registered Mooney owner I can find. From now till Sunday you can reach me via email or cell: 940.327.0707 Have a great 4th. Thank You, Barry LeBlanc Genesys Aerosystems Regional Sales Manager M: 940.327.0707 Below is a description of the proposed interface between the Garmin G1000 system and the S.pdf
  5. Hi, I am hoping we have enough by weeks end. The G1000 people need to contact me directly for the concerns they have.
  6. Hi, We did not and I have to next Monday. The questions from the G1000 operators has been answered. I will be contacting the customers over the next few days. Please if you know of any Mooney owner please notify them of the program.
  7. Hi Mike, I can not fully speak to the Maxwell Avionics situation however the Garmin Mooney STC is very model specific. Genesys Aerosystems will cover the "Long Body models" in the S-TEC STC. The experience that Genesys Aerosystems with our previous STC allows the wide model range and expedient STC advantage. The G1000 provides interface information that is required. However the G1000 is not bi-directional. You will not see mode annunciation or any altitude preselect on the G1000. This will be displayed on the 3100. We do not need any blessing from Garmin or Mooney to interface with the G1000. I hope this helps, Thank You Barry LeBlanc
  8. Hi, The 3100 is the same physical size of the 55X. The 3100 uses the same servos and that are in place. The Dealer will have to remove the servo's to check for Torque settings and for correct part numbers. Genesys Aerosystems will warranty the installed servo's like new. There is a back shell connector that will be replaced. The 3100 autopilot upgrade from a 55X for $9,995.00 is a fantastic. This would be a new autopilot for your aircraft. Product Link - http://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf If you have questions or would like to find your nearest Genesys-Aerosystems Dealer, please email or call me direct: Barry LeBlanc Genesys Aerosystems Regional Sales Manager PH: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com S-TEC 3100POH.PDF 3100 Pilot Slide show.pptx
  9. Hi, As I was locating the original 19 owners that signed up for the STC kick off to inform them of the start date, the owners dwindle down to 8 commitments. I need 8 to 10 committed owners to step up with a non-reversible purchase order to maintain the STC opportunity date. This window will close on June 30th. The STC date would be pushed out indefinitely if I can not locate the additional 8 to 10 owners. If you can call your fellow Mooney owner and ask them to consider the program below. My cell phone is answered to 10PM every night till June 30th. Please call if you have any questions. Genesys Aerosystems is looking for 8- 10 owners to either upgrade or installs a new S-TEC 3100 installation. We would need a commitment total of 15 model owners to proceed with the STC. The commitment would be in the form of a purchase order to a Genesys Authorized Installation Center. Genesys Aerosystems S-TEC 3100 is a fully featured, attitude-based autopilot that gives you a list of workload-reducing and safety-enhancing capabilities that were previously unavailable on aftermarket autopilots. Compatible with advanced digital sources & EFIS displays from Garmin, Aspen and others, the S-TEC 3100 delivers unmatched features and benefits: Precise, digital flight control for every phase of flight 2-axis (3-axis option on some models) Automatic Trim included Envelope Protection/Alerting Straight and Level Recovery Precision Approaches/Missed Approaches Indicated Airspeed Hold Altitude Pre-select Moreover, much more! For the owners who currently have an S-TEC autopilot installed, the upgrade price will depend on the equipment already installed. The 3100 AP would be an outstanding bargain to get the benefits of a fully integrated digital autopilot, especially considering the additional safety features which it will bring. Upgrades start at $9,995 retail. For the owners who currently do not have an S-TEC autopilot installed. The 2-axis S-TEC 3100 is $19,995 retail for a new digital flight control system, which includes altitude hold, auto trim and altitude pre-select, as well as new features such as envelope protection and straight and level mode. The 3-axis version adds Yaw Damper and is $24,995 retail. Genesys Aerosystems S-TEC autopilot STC process is determined by which model owners express interest. The most significant benefit to submitting a purchase order (early) is that we will extend the 2-year warranty to 3 years for all new parts from the factory (new installs and new controllers/servos). Also, we are offering a 2-year warranty on any currently installed S-TEC servos. No matter how old they are. The extended warranty offer is only valid until we gain the STC. Once that occurs, the regular warranty period will be offered. Please Visit our website: Product Link - https://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf If you have questions or would like to find your nearest Genesys-Aerosystems Dealer, please email or call me direct: Barry LeBlanc Genesys Aerosystems Regional Sales Manager Cell Phone: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com
  10. Hi, As I was locating the original 19 owners that signed up for the STC kick off to inform them of the start date, the owners dwindle down to 8 commitments. I need 8 to 10 committed owners to step up with a non-reversible purchase order to maintain the STC opportunity date. This window will close on June 30th. The STC date would be pushed out indefinitely if I can not locate the additional 8 to 10 owners. If you can call your fellow Mooney owner and ask them to consider the program below. My cell phone is answered to 10PM every night till June 30th. Please call if you have any questions. Genesys Aerosystems is looking for 8- 10 owners to either upgrade or installs a new S-TEC 3100 installation. We would need a commitment total of 15 model owners to proceed with the STC. The commitment would be in the form of a purchase order to a Genesys Authorized Installation Center. Genesys Aerosystems S-TEC 3100 is a fully featured, attitude-based autopilot that gives you a list of workload-reducing and safety-enhancing capabilities that were previously unavailable on aftermarket autopilots. Compatible with advanced digital sources & EFIS displays from Garmin, Aspen and others, the S-TEC 3100 delivers unmatched features and benefits: Precise, digital flight control for every phase of flight 2-axis (3-axis option on some models) Automatic Trim included Envelope Protection/Alerting Straight and Level Recovery Precision Approaches/Missed Approaches Indicated Airspeed Hold Altitude Pre-select Moreover, much more! For the owners who currently have an S-TEC autopilot installed, the upgrade price will depend on the equipment already installed. The 3100 AP would be an outstanding bargain to get the benefits of a fully integrated digital autopilot, especially considering the additional safety features which it will bring. Upgrades start at $9,995 retail. For the owners who currently do not have an S-TEC autopilot installed. The 2-axis S-TEC 3100 is $19,995 retail for a new digital flight control system, which includes altitude hold, auto trim and altitude pre-select, as well as new features such as envelope protection and straight and level mode. The 3-axis version adds Yaw Damper and is $24,995 retail. Genesys Aerosystems S-TEC autopilot STC process is determined by which model owners express interest. The most significant benefit to submitting a purchase order (early) is that we will extend the 2-year warranty to 3 years for all new parts from the factory (new installs and new controllers/servos). Also, we are offering a 2-year warranty on any currently installed S-TEC servos. No matter how old they are. The extended warranty offer is only valid until we gain the STC. Once that occurs, the regular warranty period will be offered. Please Visit our website: Product Link - https://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf If you have questions or would like to find your nearest Genesys-Aerosystems Dealer, please email or call me direct: Barry LeBlanc Genesys Aerosystems Regional Sales Manager Cell Phone: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com
  11. Hi, I looked on sheet and do see a pre-stc purchase order, please have Robbie send a firm PO in, Thank you Barry
  12. Hi, The owner passed away in the process. It is sad and I can not release the tail number.
  13. Hi, As I was locating the original 19 owners that signed up for the STC kick off to inform them of the start date, the owners dwindle down to 8 commitments. I need 8 to 10 committed owners to step up with a non-reversible purchase order to maintain the STC opportunity date. This window will close on June 30th. The STC date would be pushed out indefinitely if I can not locate the additional 8 to 10 owners. If you can call your fellow Mooney owner and ask them to consider the program below. My cell phone is answered to 10PM every night till June 30th. Please call if you have any questions. Genesys Aerosystems is looking for 8- 10 owners to either upgrade or installs a new S-TEC 3100 installation. We would need a commitment total of 15 model owners to proceed with the STC. The commitment would be in the form of a purchase order to a Genesys Authorized Installation Center. Genesys Aerosystems S-TEC 3100 is a fully featured, attitude-based autopilot that gives you a list of workload-reducing and safety-enhancing capabilities that were previously unavailable on aftermarket autopilots. Compatible with advanced digital sources & EFIS displays from Garmin, Aspen and others, the S-TEC 3100 delivers unmatched features and benefits: Precise, digital flight control for every phase of flight 2-axis (3-axis option on some models) Automatic Trim included Envelope Protection/Alerting Straight and Level Recovery Precision Approaches/Missed Approaches Indicated Airspeed Hold Altitude Pre-select Moreover, much more! For the owners who currently have an S-TEC autopilot installed, the upgrade price will depend on the equipment already installed. The 3100 AP would be an outstanding bargain to get the benefits of a fully integrated digital autopilot, especially considering the additional safety features which it will bring. Upgrades start at $9,995 retail. For the owners who currently do not have an S-TEC autopilot installed. The 2-axis S-TEC 3100 is $19,995 retail for a new digital flight control system, which includes altitude hold, auto trim and altitude pre-select, as well as new features such as envelope protection and straight and level mode. The 3-axis version adds Yaw Damper and is $24,995 retail. Genesys Aerosystems S-TEC autopilot STC process is determined by which model owners express interest. The most significant benefit to submitting a purchase order (early) is that we will extend the 2-year warranty to 3 years for all new parts from the factory (new installs and new controllers/servos). Also, we are offering a 2-year warranty on any currently installed S-TEC servos. No matter how old they are. The extended warranty offer is only valid until we gain the STC. Once that occurs, the regular warranty period will be offered. Please Visit our website: Product Link - https://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf If you have questions or would like to find your nearest Genesys-Aerosystems Dealer, please email or call me direct: Barry LeBlanc Genesys Aerosystems Regional Sales Manager Cell Phone: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com
  14. Hi, Please send your request to me at barry.leblanc@genesys-aerosystems.com Thank You, Barry
  15. Hi, I wanted to chime in on the conversation. Buying used the equipment and having it recertified is not a cost-effective bargain. I would ask that you contact your local dealer for the charges to purchase the STC paperwork, install kit and to certify and install the used equipment. We have 26 Pre -STC purchase orders now and the Genesys Aerosystems Mooney 3100 STC start date is July 1st. Genesys Aerosystems S-TEC 3100 is a fully featured, attitude-based autopilot that gives you a list of workload-reducing and safety-enhancing capabilities that were previously unavailable on aftermarket autopilots. The S-TEC 3100 has this feature packed into the system. Automatic Trim included Envelope Protection/Alerting Straight and Level Recovery Precision Approaches/Missed Approaches Indicated Airspeed Hold Altitude Preselect The 55X is a rate base system verse the 3100 attitude-based autopilots. The 3100 has built-in MEMS technology that is capable of working with the basic 6-Pack panel. The 3100 is compatible with advanced digital sources & EFIS displays from Garmin, Aspen, and others. The most significant benefit to submitting a purchase order (early) is that we will extend the 2-year warranty to 3 years for all new parts from the factory (new installs and new controllers/servos). Also, we are offering a 2-year warranty on any currently installed S-TEC servos. No matter how old they are. The extended warranty offer is only valid until we gain the STC. Once that occurs, the regular warranty period will be offered. Importantly, the POs are non-binding (until the STC is issued and we start building the system) so if your circumstances change, you are not obligated to purchase. Please Visit our website: Product Link - http://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf Please contact me directly at: Barry LeBlanc Genesys Aerosystems Regional Sales Manager PH: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com
  16. Hi, Here is the update for the Mooney 3100 STC program. With government shutdowns, late aircraft to the hangers and holidays we have slipped in the scheduled start date. Absolutely did not want to post news that would be false. You can always call me directly for updates. The company ODA has re-scheduled the start STC date for mid-July. We have an aircraft owner selected from NJ. My telephone number is 940.327.0707 Thank You, Barry LeBlanc
  17. Hi, The S-TEC 3100 System which will be available 1st quarter starting price is $9995.00 for upgrading from a 55X to a 3 -Axis Standard system Priced at $24,995.00. If I can help you with any questions please call me at 940.327.0707 or email me direct: barry.leblanc@genesys-aerosystems.com
  18. Hi, As I was locating the original 19 owners that signed up for the STC kick off to inform them of the start date, the owners dwindle down to 8 commitments. I need 8 to 10 committed owners to step up with a non-reversible purchase order to maintain the STC opportunity date. This window will close on June 30th. The STC date would be pushed out indefinitely if I can not locate the additional 8 to 10 owners. If you can call your fellow Mooney owner and ask them to consider the program below. My cell phone is answered to 10PM every night till June 30th. Please call if you have any questions. Genesys Aerosystems is looking for 8- 10 owners to either upgrade or installs a new S-TEC 3100 installation. We would need a commitment total of 15 model owners to proceed with the STC. The commitment would be in the form of a purchase order to a Genesys Authorized Installation Center. Genesys Aerosystems S-TEC 3100 is a fully featured, attitude-based autopilot that gives you a list of workload-reducing and safety-enhancing capabilities that were previously unavailable on aftermarket autopilots. Compatible with advanced digital sources & EFIS displays from Garmin, Aspen and others, the S-TEC 3100 delivers unmatched features and benefits: Precise, digital flight control for every phase of flight 2-axis (3-axis option on some models) Automatic Trim included Envelope Protection/Alerting Straight and Level Recovery Precision Approaches/Missed Approaches Indicated Airspeed Hold Altitude Pre-select Moreover, much more! For the owners who currently have an S-TEC autopilot installed, the upgrade price will depend on the equipment already installed. The 3100 AP would be an outstanding bargain to get the benefits of a fully integrated digital autopilot, especially considering the additional safety features which it will bring. Upgrades start at $9,995 retail. For the owners who currently do not have an S-TEC autopilot installed. The 2-axis S-TEC 3100 is $19,995 retail for a new digital flight control system, which includes altitude hold, auto trim and altitude pre-select, as well as new features such as envelope protection and straight and level mode. The 3-axis version adds Yaw Damper and is $24,995 retail. Genesys Aerosystems S-TEC autopilot STC process is determined by which model owners express interest. The most significant benefit to submitting a purchase order (early) is that we will extend the 2-year warranty to 3 years for all new parts from the factory (new installs and new controllers/servos). Also, we are offering a 2-year warranty on any currently installed S-TEC servos. No matter how old they are. The extended warranty offer is only valid until we gain the STC. Once that occurs, the regular warranty period will be offered. Please Visit our website: Product Link - https://genesys-aerosystems.com/products/s-tec-3100-digital-flight-control-system Pilots guide link - https://genesys-aerosystems.com/sites/default/files/87325.PDF Brochure link - http://genesys-aerosystems.com/sites/default/files/files/GenesysAerosystems_S-TEC_3100__Digital_Autopilot_Brochure_2017 (002).pdf If you have questions or would like to find your nearest Genesys-Aerosystems Dealer, please email or call me direct: Barry LeBlanc Genesys Aerosystems Regional Sales Manager Cell Phone: 940.327.0707 Email: Barry.LeBlanc@genesys-aerosystems.com S-TEC 3100POH.PDF
  19. Hi, Could you indicate what shop you submitted your request? I am doing a final count of who is in on either an upgrade or full-on system. Please email or call, Thank you Barry LeBlanc RSM S-TEC AP, 940.327.0707
  20. Hi, Did you sort your self out yet? If not call Al Gialousis at 940-654-0170 and he can talk you through this issue.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.