0TreeLemur

Back when we had our C model, during an owner-assisted annual where I took off all the underwing inspection plates, I found a nest and a corpse in that vicinity inside the wing with a scope. Also true that once they get in the wing, they have free run of the aircraft. I've found no sign that they've taken up residence in my plane. I think it was my fault and hopefully a one-off. Like @LANCECASPER, while I did not leave a cheese-n-crackers pack in my airplane, I left a single used honey-lemon flavored Rogue pouch. Apparently that was irresistible . The little vandal left the wrapper on the co-pilot's seat in shreds, with a few droppings but luckily did not chew on the seat or anything else that I saw.

The setup in my C involved a Mid-continent GI-106A connected to the GNS430W, and a BK KI-209 connected to the KX-155 nav/com. The analog outputs from those two indicators were connected to the Accutrak II as NAV1 and NAV2. I almost never used the VOR nav functions. I'd say you can get by with just the GI-106A connected to the Accutrak.

I opened up the tail and looked around today. No signs of entry, forced or otherwise. As per @FlyingDude, I'm guessing up the nose gear and into the belly by way of some magical acrobatics.

How do they get in through the tail? It's in a hangar, not tied down.

In the category of "it's always something...." Yesterday I went to the hangar. When I opened the door to our J I was greeted by a surprise on the right-front seat. A little mess of paper shreds and mouse poop. It seems the last time I flew I left something behind that a mouse thought was tasty. Both the cabin and baggage doors were closed and locked. Cowl flaps were closed. This happened since Monday. I've been in this hangar for six years, first time I've seen mouse turds in the cabin of my airplane. Got on a creeper and inspected the rodent socks in the main wheel wells. No deficiencies noted. Ain't nothing bigger than an ant getting in that way. Crept under the nose gear wheel well. There are some openings but they don't seem a likely entry pathway because they would be awfully difficult for a mouse to get to unless they jumped. Anybody have an idea how they entered the cabin? I removed everything and didn't see widespread signs of occupancy. I don't think that they've moved in (yet). I've seen that some folks put down rodent rings around the three wheels to impede entry. I might start doing that. Can anyone recommend a source for those? Thx. Fred

A link to another thread discussing this very issue. Highly recommend folks read what @whiskytango wrote.

Several items that I've sold or wanted to buy in the last year have attract scammers. I love them. I like to mess with them. Sadly my "WTB Turbo Encabulator" ad didn't generate any offers. "My dad has one, send money to prince@nigeria.net"

Most excellent outcome. I've driven that stretch of highway many times. At about 3:00 on a Sunday afternoon it should not be too crowded. However, in the news video you can see an overhead power line across the road right where the airplane is parked. As @whiskytango's experience has shown us, they can cause an easy emergency landing to become a difficult emergency landing. There are lots of good fields to land in around there. Many.

I fly 1000 mile cross-countries several times a year. At first did it all in my C by hand. Arrived at my destination too tired. Then like you I gathered the parts and installed an Accutrak II first in our C. It was a fantastic magenta line follower. But, after I finished my IR and started asking for diversions around buildups I started to covet the Accuflite. Installed that my nav problems were all solved. Life was so good, except for altitude hold. Next I pieced together the parts for the Brittain AH system, and with the help of some resident knowledge here, got it working. Ended up with a full two-axis autopilot, all done by tubing and rubber bands! Now I fly a J with a "modern" autopilot- the 1980's vintage Bendix-King KFC-150. Honestly, the Brittain wing leveler does a better job than the BK at keeping the wings level in turbulence because it is more responsive and smoother. The dynamics of the Brittain wing leveler are just unbeatable it seems. The altitude hold on the BK system is very aggressive at maintaining altitude within 20 ft. The Brittain altitude hold had more like a +/- 60 ft variance, and provided a much smoother ride. In mountain wave turbulence I just have to turn the BK altitude hold off or it will make my passengers (or me) puke. The Brittain altitude hold, while responsive, seems a better match for the flight dynamics of a small airplane. The Accutrak II would sometimes wander a bit. Seemed random, but more likely to happen after several hours of a long trip. The Accuflite of course depends on the rate of gyro precession on your DG- that would make long distance flights without the Accutrak a little zig-zaggy. If you can find all the parts, I'd recommend putting in both. You can use the Accuflite to help in maneuvering (e.g. holds) too if you need to look at an approach plate or weather data on your iPad while shooting an approach. It's all great for workload reduction.

I got the following info- From Honeywell data sheet: Catalog Listing 21SX39-T (MS24547-1) Mil Spec.: MIL-PRF-8805 Max. Op. Temp: 82°C [180°F] Electrical data and UL Codes: 7 A Note: it says that Prefix 21SX is the same as a Prefix 1SX with MIL-approvals They are a single-pole, double throw switch. Normally, pins 1 and 3 are connected together and pin 2 is open. When depressed, pins 1 and 2 are connected and pin 3 is open.

I've got a business trip coming up in late May in SLC. I see a good opportunity for a nice long XC in my Mooney with a stop to see my son in Los Alamos. I'm looking for a recommendation of a good field to land and tie down for four days from someone with experience in SLC.

When I owned a M20C it used massive plugs. I carried around a spare plug and gapping tools in my tool bag. Since I sold the C and bought a J that uses fine-wire plugs, I no longer need them. It's all unused. I'm asking $60 for the lot, and I'll pay shipping to CONUS addresses via UPS ground. That's essentially half price for my MS friends. If OCONUS, you pay shipping. If you want these send me a DM. I'm not interested in splitting it up- all or nothing. Thx. -Fred

^^ This is what we use too. Except we don't have those exotic tiger stripes!

The gathering on April 8 for eclipse viewing at 42A (Melbourne, Arkansas). The crew of that large grey military airplane (single engine turboprop) landed just before the totality started. They landed long and filled the air with tire smoke as the pilot slammed on the brakes with the end of the runway rushing towards him. I've never before seen an airplane fishtail like that! There were four Mooneys in attendance, including @Pasturepilot and family!

I had the cowl plugs in place. And while I didn't check the wheel wells, I suspect when when the gear came down arriving home that probably cleaned out any nest material in there. I'll give it a look though. The spot next to my tie down had a huge amount of nest material on the tarmac where the nose of another airplane once was. Obviously someone didn't put in their cowl plugs and got nested. I learned from their misfortune.