Jump to content

HXG

Basic Member
  • Posts

    171
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by HXG

  1. Thanks for sharing. We can all learn a lot from our own and others mistakes. Bad luck with the diversion Airport choice. Definitely file a NASA report. Some of my takeaways to avoid a similar occurrence:

    - Carefully choose and study possible diversion and alternate airports. I often download a separate alternates plates folder in ForeFlight for all possible airports and procedures I may use (NOTAMs will appear red at top of plate) and will often call FBOs to make sure there are no surprises like self serve fuel out of service. 
     

    - Remember to hit pack &  check ForeFlight right before takeoff

    - Also check Airport NOTAMS on the GTN650/750

    -  Ask ATC for airport NOTAMS if unsure about diversion airport 

    - Listen carefully to the AWOS, ASOS and ATIS which may only subtly report significant airport information including runway closure quickly at the end in the same monotone voice 

    - Look carefully for anything strange on the airport grounds  including vehicles 

    - Consider using larger towered airports with greater services 

     

     

    • Like 1
  2. KBJC (expect some routing around KDEN traffic especially if coming directly east to west) and KAPA (busier) are both good towered airports.

    KLMO (my home non towered airport) is good, but heavy VFR training pattern traffic can make a clearance void time of less than 5 minutes difficult without requesting help from traffic. KLMO also has heavy skydiving activity so avoid overflying the field.

    KEIK and KCFO (KCFO towered next to KDEN) are a little further away (not sure about rental car situation at KEIK), but also good. So, I don’t think you’ll go wrong with any of the above depending on your preferences of services, cost, towered vs non towered etc.

    I would probably avoid KBDU without doing your research regarding noise abatement and local traffic including glider activity as well as possible tricky winds out of the west which require an early crosswind from Rwy 26.  

    You’re smart to go for a safer front range airport, which can still have some respectable  winds and turbulence, rather than venture into the unfamiliar mountain airports, which carry much greater risk- especially if we get some more desired powder skiing. 
     

     

  3. Thanks for these Scott.

    Looks to me like  roughly 4,000 feet thick cloud layer with icing (saturated air with likely liquid water and temperatures just below 0C  that equal dew point). Icing and SLD probability gets worse near the top of the clouds with the unstable lapse rate. Climbing within the clouds will make things worse until you can break out on top, which you better be able to do quickly.
     

    A hell no go SkewTLogP for me in my FIKI Mooney Bravo. 

  4. I also went factory Lycoming Reman. Over 150 hours in 8 months on it. Runs great. Very happy so far. I almost went with Western skyways which I’m sure I would have been happy with as well.  Factory Reman 0 time was $3-4k more than my lowest overhaul quote and nearly equal to a few quotes. 

    • Like 1
  5. 46 minutes ago, Davidv said:

    Thanks, even though several people have looked at this it’s always worth a try! What lubricant specifically did you buy? Did you go behind the panel or just pull them all the way back?

    I don’t recall the brand. But, it was a simple silicone lubricant spray (without grease or other additives) I picked up at home depot. I sprayed a small amount on a cloth (slightly damp, don’t soak it) and applied it to the exposed yoke shafts after pulling the yokes back. I didn’t remove anything. I just wiped the visible yoke shafts. This was suggested by a mechanic and avionics guy I use. Fortunately, It actually worked in my case. 

  6. It sounds like you’ve already tried lubricating the yoke shafts. But, I highly recommend this as the first do it yourself fix attempt for any GFC-500 slight altitude deviations/porpoise.

    My Bravo GFC 500 began a +- 10-20 feet altitude hold porpoise a few weeks ago.  I wiped down the yoke shafts with a small amount of silicone lubricant applied to a cloth. Problem solved and GFC500 is back on rails. There was no perceptible yoke shaft friction prior to lubrication, but it was noticeably smoother after.  

    This may not help in your case, but has been a welcome easy and cheap fix for several pilots with Pipers, Bonanzas, & Mooneys. 

    • Like 2
  7. I’m looking at this from the autopilot perspective rather than Garmin vs Aspen.

    I installed Aspen PFDs in my 2 most recent planes, but I didn’t miss the Aspen after going to G5s especially after gaining the GFC-500 autopilot. I like their simplicity and cost without the potential fancier Garmin unit headaches. I don’t need synthetic vision, which I have on my Ipad, to fly with precision I would definitely get a Garmin GTN or GTNXi 650 or 750.
     

    I’ve flown many autopilots.  The popular Garmin GFC-500 and GFC-700 are the best in my experience. My GFC-500 has been rock solid and on rails in turbulent windy conditions. I like an autopilot that I can rely on when I’m getting tossed around in IMC over the rockies. My KFC-225, a very good autopilot, doesn’t come close to the GFC-500. 

    4802C06E-995D-4E55-8A61-664C8BC11D7B.jpeg

  8. Dual Garmin G5s and GFC 500! 
     

    That’s all I need. I see no need to upgrade to a txi500 or Garmin G3X- beautiful capable units that won’t really help me fly an approach any better.

    I like Aspen and their service. I never had a problem with their older units. But, after experiencing 3 separate Aspen Max unit failures in 6 weeks during their early Max release,  I decided to move on.  I replaced my Aspen and KFC- 225. I couldn’t be happier with the decision. 

    Aspen units are good, but, if you’re looking for an excellent new autopilot go GFC 500 with G5s. Well worth it. 
     

     

  9. 7 minutes ago, Scott Dennstaedt said:

    Wrote up some more details in my blog here.

    Scott, great discussion.

    I had a feeling this case was setting us up to disregard the instability producing the possibility of icing. The CAPE value is less impressive than I thought it would be, but I think the important point is that of the instability overshoot of cumulus clouds above 15,000 feet. Looks like 19,000 feet or higher would be better altitude option, but certainly not high enough with a significantly greater instability/ higher CAPE and higher temperatures.

     

    • Like 1
  10. As far as top common questions, I would guess some  involve:

    Predicting IMC- cloud bases and heights (helped by models and skewTlogP) and reduced visibility including fog

    Predicting icing-(helped by models, freezing levels, temps, clouds/visible moisture, icing products, skewTlogP) and best way to get out of icing- climbing with shallow angle, descending, 180 degree turn (I know it depends).

    Predicting turbulence and high gusty winds as well as low level windshear- I also live on the Colorado front range and I must admit there are windy turbulent days that can be tough for me to explain other than the obvious nearby mountains (i.e., local denver TAFs underestimate winds as less than 20knots, but TAFs at airports less than 80nm away predict 45 knot winds, I can’t find upper level 500mb and above or jet stream support, no nearby front, no nearby lows, skewTlogP may not show reasons other than some higher altitude winds, isobars don’t look close etc.). Graphical turbulence airmets do a pretty good job, but areas are so wide and common that they have limited utility for me at times.   

    Thunderstorm avoidance- although with the exception of embedded thunderstorms, I think thunderstorms can generally be avoided.

     

     

  11. I received my 2nd dose Covid Pfizer vaccine a little over 3 weeks ago. I’m a health care provider so I can share my experience as well as that of 100s of health care workers in my circle. 

    Severe Allergic reactions are extremely rare. Most people just have a little more arm soreness than they experience with the flu vaccine that lasts a couple of days on both doses.
     

    On the 2nd dose, a few more symptoms do occur with both Pfizer and Moderna vaccines, but are generally mild. A few may feel a little tired with muscle aches for up to 48 hours. Some people had a fever and chills typically beginning 12 hours after injection usually lasting 24 hours or less, but possibly lasting up to 48 hours. 
     

    I was an outlier in that I had a fever of 100 for 12 hours after the first injection and then a fever over 101 and chills lasting 72 hours after the 2nd injection despite round the clock tylenol and advil. Since my symptoms lasted beyond 2-3 days, I got a COVID test which was negative. I had some arm soreness which I personally think is a little silly to complain about. I still have some tender lymph nodes in the arm pit on the injection side which is improving. These greater side effects are more common in younger people (I’m middle age), but are a good thing since they are indicative of a strong immune and antibody response (likely increased vaccine efficacy above the overall 94-95%). The more symptoms you have on the first injection, the more you should expect on the 2nd  injection. 
     

    I highly recommend getting the vaccine as soon as you get the chance. Yes, a booster may be needed to down the road for longer lasting immunity and for new virus variants, but it’s all well worth it. 

    • Like 5
    • Thanks 1
  12. Not sure if everyone is aware, but no need to hit HOME to get the Flight Plan on the GTN. Instead, tap  the active leg line ABOVE the CDI (circled in red below) on the map or default nav page to open the flight plan. You can also load and activate an approach from the flight plan page if you want although hitting HOME then PROC is pretty quick.

    Personally, I like using minimum steps cycling between Map and Default Nav page and Back and tapping the CDI on the GTN for the flight plan during flight. I also load my expected approach and use activate legs, Direct to IAP Fix or AVTF depending on the situation. If you’re activating the IAP within 2-3 miles of the FAF, you’re probably a little behind the airplane. 

     

    375A8100-325C-4640-8668-463DE919064E.jpeg

    • Like 2
    • Thanks 1
  13. I recently put my used 3 blade Mccauley Bravo prop on consignment at Rocky Mountain Propellers in Erie, CO. It may be available for sale. I just upgraded to the 4 blade MT prop when I put in a factory reman engine. The MT prop is awesome- quiet, smooth and added climb performance with at least no cruise speed loss, if not faster. The MT prop may take several months to get so plan way ahead if go that route. 

  14. I think a sleet and snow mix would be seen at the surface. Freezing rain is also possible, but, I favor sleet due to a more shallow warm layer above freezing associated with the inversion and a thicker below freezing level just above the surface. I would expect some freezing rain higher around 5000 feet, but would expect it to freeze to possible ice pellets with additional sleet at the surface. Given the prolonged near 0 temperatures in the inversion I would expect some mixed precipitation. 

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.