Leaderboard

It’s been some time but wanted to share with you the painting I did for last years silent auction at the summit. I Don’t know if the winner is someone that visits Mooneyspace but wanted to thank them for their contribution to the Gilliland (spelling corrected) foundation. Was very nice working with them and I was very happy with the results of my work as were the recipients. They run Cadillac aviation in Michigan. John

For your entertainment and viewing pleasure, I will be presenting Anthony @carusoam on display at the Dean of Mooneyspace Lunch Fly In at 47N Central Jersey airport at noon on Saturday 4/20/24. Free autographs on a first come first serve basis. You might even have the opportunity to buy him lunch. $5.35 100LL self serve. Park on the main ramp and a very short walk out of the airport to the restaurant on the corner of the road leading into the airport. Don't let the name "Pizza 'n Pasta" fool you. This place has Stromboli's, Calzone's, and other Italian delights such as Anthony Caruso. Need I say more?

I try not to ascribe duplicity to any situation where ignorance or dare I say, stupidity will suffice...unless I have firsthand knowledge that suggests otherwise. I did not know this pilot, but I also find it hard to believe that he did not understand that the undisclosed medical conditions for which he received treatment were disqualifying without an SI. However, I never underestimate people. I met Mooney owner just last week with a beautiful 201 that he said "cruises at 180-190kts, depending on the wind". He did not pick up on my confused look at all. The conversation did not last much longer but what remained of it convinced me that I often over estimate intellect.

Is there any evidence the lack of medical was the cause of the crash? The NTSB didn't think so. Is your contention he should be denied insurance despite the fact that the rule he broke was completely unrelated to the cause of the crash? If so, why stop there? What if he was fleeing from robbing a store but was otherwise legal? Should he be denied coverage because of that? After all, the crime is unrelated to the crash but he did just break the law, not just an FAA regulation. Or, is it just 'anything' you decide is related to aviation? So, if you knowingly fly one day out of 90 currency and crash should you be denied coverage? How about if you knowingly fly 1 pound over gross and crash due to running out of gas? Heck, there is a reg about carrying sufficient fuel so why isn't that a deliberate violation... I mean, you must have been cognizant fuel was low but deliberately and knowingly continued on anyway. Deny that coverage, right? Flying to your annual a few days after your old annual expired because of a weather delay? This guy, even per the NTSB, didn't crash because of lack of a valid medical but from spatial disorientation. Why do you feel he should be denied coverage for something unrelated to the crash? A better argument would be that he was out of instrument currency. So, we are back to who is the arbiter of how far out is too far out before coverage is denied? I'm comfortable with the insurance companies making that call. I guess I'm just tired of all the holier than thou Monday morning QBs looking for any reason to deny insurance coverage so their precious premiums don't go up. The worst are the ones that want to deny coverage for gear ups! But the moral high ground argument (oh, he broke the 'rule' so DENY, DENY, DENY!! I'm so righteous.) are tiresome, as well. Ever knowingly drive over the speed limit? Think your auto insurance should be denied if you crash while speeding? How about someone injured by your illegal actions, be they in an auto or an airplane? Should they be denied compensation from your insurance because you broke a rule or law? How about your example: you let someone drive that isn't licensed and they injure someone in a crash and you don't have assets to cover since the insurance denies coverage? Does that seem just? Change it up a bit: your unlicensed hypothetical driver is in an accident that is NOT his fault; he's sitting at a signal and is rear ended at a stoplight by an uninsured driver. You okay with your insurance denying coverage? How about if someone else in your car is injured? Still okay with coverage denied? Be careful on that high horse; the fall may hurt more than you might think.

Update, the belly pan came off and the chain was sitting there with the connector link missing its retainer lock thingie. With the help of this group I was able to find a replacement connector link on Amazon. I showed it to my mechanic and he said that will work perfectly. I got four of them for five dollars. It has to be the cheapest aircraft part I’ve ever bought. I have three now available for sale at $250 each if anybody needs one.

+1 that Varsol is essentially a brand name for a particular (supposedly purer) type of mineral spirits. The brand is currently owned by Exxon Mobil. Stoddard Solvent is similarly just a particular type of mineral spirits. It's like "Kleenex" or other brands that have become product names; unless there's some reason to believe otherwise, they mean "mineral spirits". Stoddard Solvent was branded as a dry cleaning agent. There's nothing special about it for aviation use, other than it is less flammable than gasoline so safer as a general solvent. Another thing that is often used for ring flushes is Marvel Mystery Oil (MMO) which is usually available at places like Wal-Mart or auto parts stores. People often use MMO straight without mixing it with anything. FWIW, MMO is mostly mineral spirits but also has some other interesting stuff in it. If you want you can cut it with your favorite motor oil, but it's probably fine to use straight. Whatever you do, after the ring flushes are finished, don't run the engine until the oil is changed (probaby goes without saying, but is mentioned for completeness).

Mooney N58089 $175,000 OBO 1985 M20K 305 Rocket Serial 25-0872 Based at: KHEG (JAX area) and 6D6 (Hastings, MI) TSMOH: 602 TTAF: 2894 TTE: 2000 Prop: 602 Annual due: 11-2024 IFR Cert Due: 04-2025 Empty Wt: 2230.4 Empty Wt CG: 42.87 Useful Load: 969.6 Avionics: Garmin GI-275 Engine Monitor, Garmin GNX-375 GPS w/Transponder, PMA-8000 Audio Panel, Garmin GTR 200B VHF Com, Garmin G5 HSI, Garmin GNC 255 Nav/Com, King KAP 150 Autopilot w/297 Altitude Preselect. Full IFR panel makeover 9-2022, USB port included. Detailed Description: 1985 Mooney 305 Rocket. 2894 TT, Turbo Continental 520, Garmin GI-275 Engine Monitor replaces all engine instruments, Garmin GNX-375 GPS with Transponder, Monroy Long Range Tanks, Speed Brakes, Four Place Oxygen. Misc: All logbooks digitized, extras include instruments removed from panel upgrade in 2002, LED landing light installed 2021, nose gear landing pucks replaced 04-2024, Mike Busch books, customized aircraft cover & accessories, 2 lightspeed headsets, and various other aircraft consumables. Currently subscribed to the Savvy Aviation maintenance concierge program which is transferrable. Additionally, I have a Garmin database subscription that expires 10-2024, which may be transferrable. Extra SD card included for database updates (handy!) Note: I bought the plane 3 years ago and installed the new panel, as well as cleaned up some deferred maintenance items. The plane is a beautiful, fast cross-country IFR platform that burns approx. 18 gal/hr at cruise of over 180kts. It has a 100+ gallon fuel capacity, and 4+ hours range. Unfortunately, due to health issues in the family, and a change of mission, I need to sell it. Google drive link for all logbooks, pictures, etc. More pictures to come! https://drive.google.com/drive/folders/1oTd_xgbmIGT7MtCUBK49v5czTQ8zBwwZ?usp=drive_link

The only case of insurance denying a claim due to pilot false representation (claiming to hold a valid medical, claiming to have completed policy-mandated annual recurrent training) that I personally know of (and I know only because I knew both the pilot and the lawyer representing the insurer) was due to the pilot’s pattern of willful misconduct and not simple neglect or innocent errors. With two fatalities and total loss of a nice Citation the potential claims were not small, either. Generally speaking, insurance companies do pay regularly for the dumb pilot stuff we keep doing.

So the pilot of the Cirrus that spun in at Love Field in 2016 was at 25 months since her last flight review so just one month out of currency. One could make the argument that her unfortunate lack of airmanship might have been corrected prior to the accident had she received a proper FR in the weeks leading up to the accident flight. It's no stretch to attribute that accident to task saturation and poor airmanship, the very reason we get a flight review is to identify and rectify deficiencies in our performance. Legally out of currency and a fatal accident attributed to poor airmanship. Should her insurance have denied to cover that loss? The same case could be made for the Mooney accident. Much easier to make the case that his lack of instrument currency was causal when compared to the medical issues. I'm sympathetic to your view point, but I think that the professionals in the industry have repeatedly encountered this situation and found it preferable to err on the side of paying claims in spite of bad boy/bad girl acts. In the case of this Mooney accident, you appear to be implying that there was intentional and deliberate fraud with regard to this pilot's policy renewal. I don't think we have enough information to be sure of that but it's certainly a strong possibility. In such a case, I think it's prudent to pay the liability claims but the pilot and their heirs do not collect.

What the other guys are saying nicely is that you’re not leaking a qt/4 hours. If you were, you’d be shocked at what the bottom of the airplane looked like. You’re likely leaking a tablespoon per 4 hours, but hot oil spreads very easily and makes a big mess. I’m not saying that your oil level doesn’t go down by a qt/4 hours. Actually that’s not terrible, but it’s unlikely caused by a leak. Oil can also go out the breather or through the exhaust valves. Blow by of the rings is pretty common and will significantly increase your oil loss. These things do use some oil. Now there’s absolutely nothing wrong with finding/fixing your leak (we all have small ones), but don’t expect it to change your oil use. Most of these engines use a qt/4-12 hours depending on cylinder type and age.

Don't put the bait in the hangar! Your hangar should be a "food desert" they don't want any part of crossing into. Bait is food. Place the bait outside in run in cubes and not close to the hangar. Make sure no one, and I mean no one has any food in or near the hangar building. No food, no mice.

God help me if I ever track my expenses. The airplane would be up for sale the next day.

Call Herber Aircraft. They are a Lord distributor and consistently have the best pricing on Lord products. Their parts people are very good and will be able to help. A bonus for you is that they are in El Segundo.

My fear is always about the power lines that you can't see until you're right on top of the road.

I would never want to second-guess a successful emergency landing with no injuries to person or plane, but I usually think of a highway as a last-resort landing option. I wonder what factors led to the highway decision.

Take it off and clean it real good by scrubbing it with a tooth brush and comet cleanser until it rinses off clean, inside and out. Then get some 1oz fiberglass cloth and cut it into patches a little bigger than the hole. Apply a thin coat of black RTV around the hole, on the outside and stick on a piece of fiberglass. Then apply a little RTV over the patch and work it into the cloth till it is saturated. Massage it until it fits the shape of the boot folds and doesn’t protrude into the boot. Now apply another piece of fiberglass and cover with RTV. Let it cure overnight. If there are any fringes of fiberglass, trim them with a surgical scissors. Then add another thin layer of RTV to make it look good. All RTV work should be done with rubber gloves on. The RTV layers should be as thin as possible while saturating the fiberglass. The RTV will only bond to the boot if the boot is clean and dry.

There is a little chain that connects to the trim wheel. The chain can pop off if it isn’t properly lubricated, and when it pops off the wheel will spin freely. Definitely talk to an A&P because you’ll want to rule out a need to lubricate the trim jackscrew. But this might be a 5-minute fix.

"The difference between intelligence and stupidity is that intelligence has its limits" Supposedly said by Albert Einstein

Would be interesting to know how many of the pilots on this board have had an "oh $h!#" moment discovering an overdue flight review. Harder to do in this day of electronic calendars, but still possible.

We all have our preferred set of actions and situations we want covered and those that we don't want covered. Why don't we exclude from health insurance coverage anybody who doesn't actually follow the doctor's advice on dieting, exercise, and smoking? I remember someone on mooneyspace wanted to reject coverage for any flight with a special flight permit. And I think someone else or maybe the same person wanted to reject fuel exhaustion claims. There isn't a large enough pool of people to offer specific policies for each set of things people want covered or not. If you have not heard this line that I think started with George Carlin: Have you ever noticed that anybody driving slower than you is an idiot, and anyone going faster than you is a maniac?

An Insurance policy is fundamentally a financial contract between the indemnifier and the indemnified. The limits and limitations of the policy are codified within the contract. An accident/incident either falls within the bounds of coverage or it does not. It’s not a moral decision. It’s not about accountability for one’s actions. It’s simply a contract. Accountability for criminal behavior is for the criminal courts. This is not a new concept nor is it a byproduct of neomarxism.

To reiterate @Shadrach, and others, what do you buy insurance for? To cover YOUR MISTAKES! Do you really want to pay for a policy that is going to deny YOU coverage because YOU broke a rule? Be VERY careful for what you wish for when saying, "You would think" insurers should deny coverage for legally errant pilots. Ask yourself how many accident reports you have read where the pilot was innocent of any and all transgressions.

You have a King KLN89 GPS installed. If you want to go cheap-cheap, since a lot of these are on the market you could slide in a KLN89B or KLN94, which are both "approach certified", but not WAAS. You would probably need new coaxial, new antenna, paperwork, etc. That being said, here's why I wouldn't do that. Every penny you spend on that you will never get back and it won't accomplish what you want for your end goal - WAAS approaches Even if you can't do it immediately and you need to save up for it, do the WAAS GPS and HSI together on the same install. The 175 will do what you want, but here's why I would consider getting a 375 with the transponder built in. 1) Your King KT76 transponder has a cavity tube which will go out eventually and unplanned - then you're faced with doing it. 2) you will have ads-b in/out on the same device and be able to see traffic & weather on your route plus it will bluetooth that info out to your tablet 3) no matter what you do with your panel later, the 375 will stay and will have freed up some space. With your round instruments already and the increased capability I would get the GI275 indicator. It will be much less expensive to do it together than separately and with the SVT option will make your instrument training much easier. Also when you do it together the installer has to make sure everything he touches works together. Doing it twice, when something doesn't work, will get blamed on the previous install - even if it was done by another person at the same shop. Edit - the more I look at your panel - if you're planning on keeping this airplane any length of time I would cut a new left panel and get your instruments in a configuration where you can do a meaningful scan. Learning on this panel will be unnecessarily difficult to get your IFR rating and even if you get through it you will have to unlearn your scan if you fly anything else. @Aerodon cuts panels.

You are still in the normal range, but something is somewhat different. If it were mine, I'd just watch it, and if it doesn't get worse, I'd see what happened after the next filter/oil change. If you are worried about it, you could just change the filter and see if that makes a difference since that is the only part that was changed.

clean real well with mineral spirits, let dry, spray suspect area with white developer from dye penetrant system, run engine on ground for 10 min on ground at 1200 rpm, check if you see any traces of oil in the developer, if not go fly airplane for 20 min so all engine parts are at ops temperature, land airplane, pop cowl and look for oil traces, this will give you an idea where the leak is, if there are still doubts, clean everything again, spray smaller area with developer and run the engine again, no black magic, just persistence does the trick

Funny enough, I just come across a British friend who told me that Guy Ritchie bought his airfield in UK, saving a historical aviation heritage (that would have gone to property developers), now he is running it with such enthusiasm, well done Ritchie, GA is a small world as they say https://flyer.co.uk/guy-ritchie-confirms-flying-to-continue-at-compton-abbas/

Final- https://data.ntsb.gov/carol-repgen/api/ ... 105237/pdf Docket- https://data.ntsb.gov/Docket?ProjectID=105237

It is impossible to seal everything. I keep a couple of bait stations in the hangar and a couple of ultrasonic devices plugged in and sometimes I've tossed a peppermint oil repellent bag in the baggage compartment. So far, I haven't had an issue.

Rounding error. Go fly the plane.

My IA claims he will get a big old military piece from the 60s from a friend in Jersey before he kicks the bucket, then we will overhaul and test our own mags, let's see.

I would take your focus off of whether a shop has to be a repair station to do the work. You want a specialist who does mags successfully every day to do the mags on your airplane. You do not want someone learning on your mags. There are a few good shops across the country that do mags. Having one close to you is not nearly as important as finding an excellent shop - that's what UPS and FedEX are for. But now drilling down to your specific mag, if one of the best shops in the country, Aero Accessories, won't do them I would pay close attention. That means that even with their very high standards they have a high failure rate. Internal parts can be replaced with new, but is it the housing that wears and makes a reliable overhaul improbable? Why the high failure rate? You must have a good A & P, since he realizes that a great shop has turned down the work - why would he want to put his reputation and your life on the line? Are you noticing a pattern here? People who make their living doing things like this are turning down your money - very unusual in aviation that anyone turns down your money. There must be a good reason. Talking another A & P into doing it may not be a good choice. Slick mags when they came out were regarded as "disposable" mags, even though some models were better than others. I would explore better options: Does Bendix make mags for your engine? Does Slick make new mags for your engine that May have been updated and improved (even though new Slicks haven't had a perfect reputation the past few years)?

If you are stranded away from home and cannot find a link, I don't see why a temporary repair could not be made using some .020 safety wire in place of the clip.

The IPC just says, "Chain, master link, #25 pitch." I don't think there's anything special about it. A bike shop or hardware store probably has one.

I recently sold some pedal extensions and some other loser tried to get payment directed to him. And a month ago I sold some brake masters and the buyer got scammed out of a deposit. There are bad guys amongst us, sometimes its easy to spot, sometimes not. Don

Let me know when @carusoam does his Texas tour.

I hate being “that guy”, but you’ve got one glaring error that needs to be addressed so no one gets hurt. It’s wintergreen, not peppermint.

Hi Don, I find the ground situation completely different now that I have a wood wing Mooney. David

Vacuum pumps fail a lot more than AIs AI failure is rare Want a good power system for the AI that can't fail in Mooneys? Get it powered by a venturi If you have flying speed you have a good AI Don't talk about ice- you shouldn't be in that kind of weather in a Mooney anyway Which one of 2 AIs has failed ? Try it sometime"-) for real IMC (sim or flight I don't care) In the 121 world 3 AIs is mandated We used the 'best two out of three" syndrome. Had a chief pilot once on a CE 500 who couldn't handle the check ride when they failed his AI. Couldn't disregard his bad instrument and go small third or transfer controls to my side. I'm left wondering what the old Pan Am pilots on the Clipper Ships did around the world when they didn't even have gyro AIs back then? "Here kid, you fly this thing needle ball airspeed" They didn't piss a moan about "partial" panel because that was ALL the panel they had. No such thing partial panel then. AND in some cases they had one needle in the center of the entire panel to look at. Had several what we called "autopilot cripples" in the 121 world. Without it they couldn't get it down inside the fences at the airports- LITERALLY! Always hand flew every third approach by hand to keep sharp. Many down to CAT III mins just in case In the AB 319 I would fly an ILS by hand as I don't think their stability program is all that good. In smooth air it always seemed to wallow around coming down the slot. Autopilot dependence and "Children of the Magenta Line" go hand in hand. (If you don't know of the training film "Children of the Magenta Line" you owe it to yourself to go to utube and watch it. )

If it’s the chain, the indicator will move with the electric trim. If it doesn’t, the trim torque tube is disconnected somewhere.

Y’all are not true CB’s. I use the packing paper in Spruce boxes to making an oil drain channel. Since the paper isn’t rigid, it is easy to push up under the oil filter. I also usually wait a day to remove the filter. Lee

Just when I was thinkin' that our petroleum powered flying machines are the pinnacle of aviation, this article gave me a reason to reconsider. It describes a satellite-logged flight of a 5-month old Bar-Tailed Godwit in Oct. 2022. https://www.scientificamerican.com/article/why-feathers-are-one-of-evolutions-cleverest-inventions The bird was tagged as a juvenile in Alaska. Flight path shown here: https://www.usgs.gov/centers/alaska-science-center/news/juvenile-bar-tailed-godwit-b6-sets-world-record Wow!

Well, I don’t think this is as simple as you might prefer. The evidence here falls way short of establishing the “brazen fraud” you posit. He was certainly licensed (certificated to be pedantic) as I saw nothing to indicate his cert was ever revoked. As far as the medical, I’m allowing for ignorance of what conditions require a new 3rd class medical when already under Basic Med rather than conclude deliberate malice. This guy paid for his mistake with his life, and fortunately didn’t hurt anyone else. And now you want to punish his grieving wife by denying the claim for the plane and having her pay for damage to the farmer’s field out of her pocket? You certainly aren’t punishing him!

I would use a piece of closet rod and a vice to make the bend. Clamp one end with the closet rod. Then use a rubber mallet to help you bend it. If the closet rod is the wrong size then wood dowel. Go to NAPA and get some of the little springy things, drill a hole and insert. Then go to fabric store and buy some foam filling, some leather of your color and some contact cement (not the water based, the good smelly stuff) Cut and glue. Pilots can do interior stuff under Preventive Maintenance. Make it look better than factory and nobody will care. If you want to redo all the lower panels in leather. leatherhidestore.com Buy a couple of hides. There is different weights of leather hides.

The other day I was talking to a TBM owner at KMTN. His jaw dropped when I told him the "M" stood for "Mooney". Then I showed him the picture and recounted the history.

Update on the M20K airplane with the popping "Gear Cont" circuit breaker. On the flights immediately preceding this activity the circuit breaker had popped two or three times after retract. The airplane was jacked and the belly #2 panel removed for access to the limit switches and relays. All the the wiring was thoroughly examined including the left side cabin interior where the harness for the gear switches and relays come up (a pinch point) and going forward until it goes into the harness and is untraceable. The circuit breaker area was examined for loose lugs and rouge loose screws. The wiring through the gear safety switch was checked (a path for control voltage). The gear was cycled >25 times (with the airspeed safety switch satisfied) and the CONT circuit breaker never popped. Two halogen 37 watt bulbs were connected in parallel to the up relay coil input to increase the load on the 5 amp control breaker, the actuator breaker was pulled and the gear commanded to retract. This powers the up relay and the lights continuously - the CONT did not pop indicating the problem is not a weak circuit breaker or 'continuous relay on' load problem. The up limit switch was cycled by hand many times each time turning the up relay off/on - no problems. A short to ground from the relay coil input pops the breaker verifying the breaker will operate. The up limit switch was replaced with a new switch and the gear operation (retract stop point) checked. The lower gear door on the left (port) side was too tight and adjusted. All the gear activity caused the wire to light bulb socket under the floor to fatigue break (a previous repair) - this was repaired with better strain relief. The gear was probably cycled 40 times total on the jacks and the breaker never popped. The airplane has since flown twice with 8 retract cycles with no popping of the circuit breaker. One could surmise that replacing the up limit switch fixed the problem but it is hard to understand given the circuit design. Time will tell.

There is an old saying that if you have a clock, you always know what time it is. If you have two clocks, you have no idea what time it is. The only way the real voltage can be different between the two voltmeters is if there is a significant current flow between the two meters. The two volt meters draw very little current themselves, so it is most likely a calibration error on one or both of them. The only way to know is to measure the voltage at each of them with an independent volt meter such as a handheld meter and see how they compare.

Thanks for the diagram, that makes it a little easier. 12, and 13 if you need, to lube the rod ends for the aileron pushrods. 15 to check the end of the gear assist spring attachment and spar. Once in a while, or if leaks are evident, the forward 16 to see if there is any staining inside or evidence of fuel travel along the leading edge. Also whichever 14 is just off the end of the tank (which one depends on the tank configuration), likewise to check for any leaks, condition of the fuel sender gaskets, etc., if issues are evident. For a pre-purchase inspection, or once in a while in an area where corrosion is a concern, the rearward 16 gets you a look at the attachment point of the wing and steel cage and the rear spar caps. This is a common area for corrosion. Corrosion isn't an issue here, so my previous IA only ever wanted 12, 13, and 15 off. I do the same now unless there's reason to do more, like fuel stains or something. Looking in either or both 16s once in a while is not a bad idea, especially if corrossion is a concern.

I'm not saying this about the OP, but shops need to take high-res pictures of planes when they enter into their possession. There are certainly instances of some owners just not realizing the blemishes exist prior to the shop taking custody of an aircraft.

Could you go to a modern HSI and drop an engine monitor in place of one of the old CDI's? Sent from my motorola edge plus 2023 using Tapatalk