Leaderboard

Check the useful load of the planes you are looking at compared to yours and then consider how big the 6 & 7 year old will get and how much fuel you need to make the flights you want to make. I like a Mooney as much as the next guy on here, but if I had a plane with the kinks worked out already that was a known quantity, 4 gph would not convince me to sell it and switch to something else. Now, if you want to switch because a Mooney is way cooler and more fun than a Cessna - welcome to the club. You've found the right place.

I just talked with my avionics guy. He's doing my annual this month. Called asking about my AI leaning. Ended up talking me into an Aspen. Not gona tell my wife. I'll wait to see how many flights it takes her to notice. Lol. I asked him point blank how the TT integration is coming. Said he spoke with aspen last week and the heading/barro is working between aspen and TT on their bench. Guessing it will be live by Oshkosh. Sent from my SM-G930V using Tapatalk

Another quick trip to civilization looking forward to a long flight in the near future and will be making some inquiries about our destination. Today's flight was problem free but had some pretty challenging winds at both fields. A couple pics showing the strong marine layer to our west, was about 20 miles in from the coast. Also is a nice picture of Lake Berryessa dam the round circle is the glory hole which is the spillway. It's still flowing a little. A few weeks ago it was really flowing. Most water in California in over a decade.

Even my C will walk away from a 182 on 2/3 of the fuel flow . . . . Don't compare useful loads directly. Plan a flight, determine fuel required, add reserves (I like an hour, or 9 gal), then compare how much you can carry for that trip. I think you'll be surprised. I carried hurricane relief supplies, reaching the distribution point after almost 4 hours in the air (with a long, long arrival). I listed 650 lb lift capacity, by far the highest single engine load I saw among the 40+ planes signed up before me. Needless to say I ran out of space before load. My second trip with full tanks was limited to only 470 lb . . . . Having the ability to trade fuel for load is nice! Thanks to our fast, efficient Mooneys. And I was a Cessna pilot before, a whole 62 hours in my logbook at purchase. Very doable. The big deals are: 1) remember the gear; 2) speed control in the pattern, especially on final. Mooneys will slow down OR go down, but not both.

The latching system is adjustable and the inside door handle will snap "overcenter" (forward) when properly adjusted. I have sometimes closed the hook some on the latch with some channel lock pliers , to more positively grab the vertical pin. Paul

Just wondering if anyone has gone from a early 182 to a m20f or c model, and can tell me what their experience was? I own a 182, typically fly a mix of long cross countries 300+ nm nonstop, or short 100nm hops. The appeal of the same cruise speed at 4gph less appeals to me, two adults and two small children (6&7) is my usual load. On paper these models seem to similar useful as my 182, with close to the same cruise speed but much more efficient. I'm not to particular on o360 vs io360, but leaning towards the IO since I haven't owned a carbureted aircraft before. The four cylinders vs six appeals to me, but I haven't had much issues with mine in 250 hours of owning it, save for one cyl I swapped due 50's comp at annual. I put my 182 on a classifieds post this weekend to see I had any chance to sell after I saw a few nice mooneys under 70k, wish I could just own both. I was surprised to have a few calls already, so it is doable.

Probably about the same number of flights with a new paint job That aspen is going to be really nice!

Is that Hypnotized or Hippo-tized?

A friend here is trying to justify a new Garmin autopilot for his J. I told him that safety sells. She is already worried about him becoming incapacitated in flight. I told him push the safety features of the GFC and he will close the deal in a heartbeat. How do you think I got an STEC 60-2 in 1998?

She barely flies with me. We're good. When she notices, I'll be like "oh, that? I've had it for a while" Sent from my SM-G930V using Tapatalk

Finally, I have a potentially good answer as John-Paul and I have been speaking about data I have been sending him. Basically, after looking at the data, he is sending me a leaner #2 and richer #5, #6 nozzles. My spread has been as wide as 1 gph and he is pretty confident that this swap will get me within .5 gph or lower. Obviously, this should also allow me to run deeper into LOP which should lower my TIT. I still have not done an ignition test up high (but plan to) but John-Paul said it is not necessary from the data he is looking at. I did reset my JPI to record at 1 second intervals, as well. I want to again thank all you guys for weighing in with your thoughts regarding this initial issue. The collective knowledge of this forum is stunning. I am still learning to fly the airplane with the Merlyn (which is a totally different animal than a fixed waste gate) but the JPI is giving me a wealth of information I didn't really have with the JPI 800 (or maybe I just didnt understand it). The non-turbo guys who spoke up here are also appreciated for being willing to try and share their thoughts....turbo's are a completely different animal and have to be flown in a manner not consistent with the N/A engines. I am still tweaking the FF but we are really close....I think another 1/4 turn richer will get me to the "sweet spot" of 25 gph at 37 MAP and drop my CHT's on climb out to well below 380 degrees.

Apparently all NFL footballs now contain a chip developed by a 26 year old whiz kid on our field. A smart phone app ( I think) reads the ball internal pressure. Tomorrow as he works on his long eze I will find out if that has an aeronautical tire pressure application. Something tells me he has already considered that. (That’s a lotta footballs)

1982 and on

Okay, so I've been putting off repairing the infamous "stuck roof vent" problem that's plagued my C model since the upholstery was redone. It's been stuck in the open position for at least 4 years and I've just been putting it off. Well, I finally decided to take the project so I set aside a full day of wrangling headliners and trim parts and finding the necessary hardware to repair whatever I found to be froze up. I rounded up all the tools I thought I might need, put some music on the stereo, and had a yeti mug full of ice water and started at what was to be a while of sweating in my cockpit. I started by beginning to remove the trim that surrounds the front overhead vents and cockpit lights along with the vent control knob. I removed the 4 small screws that hold it in place and inserted the small allen wrench to remove the vent knob. I decided to just try to move the knob a bit to get to an easy position to loosen the allen nut when, much to my amazement, it rotated freely and the roof vent closed completely. I repeated opening and closing it several times with a stupid grin on my face. As it turned out the back left screw was about 1/8" too long and was engaging the gears of the vent mechanism and had locked it in place. Total hardware needed to repair vent-shorter screw. Time of repair-15 minutes. Sometimes I'd rather be lucky than good. Don

Some thought it was because after my playing days, I ballooned up to close to 300 pounds from my playing weight of 235. And this was a way for me to justify being a fat guy. "I wasn't a fatty, these are fatties!". Others believe I am one of those guys who possess the recessive gene that triggers admiration of large rotund ladies. While others, believed it was a tactic used by me to defuse some of the uglier threads this site produced. What's worse? Reading about Little Timmy or being bombarded with pictures of large rotund ladies pictures? You pick...

Your upper latch is not catching.

I FINALLY was able to fly my bird since I left it in September 2018. Bad Wx, ice-blocked hangar doors, and family blocked me from bringing it to my new home since December. I don’t think the engine has ran since the end of Feb per my A&P. It started easily and it has never ran so smooth as he said the timing was off by a hair (overhauled mags less than a year ago). The prop governor didn’t want to cycle during the run up. It worked fine after I adjusted the RPM’s after leveling off. I think they’re selling this if anyone wants it: Sent from my iPhone using Tapatalk

I just completed a week long 5174 nm journey with my 13 yo daughter. Her spring break started last Friday after school. I flew from Erie, Pa (KERI) to Boston (KBED) to pick her up. From there we stopped in N.C for dinner (KECG) and on to St. Augustine, FL (KSGJ) for the night. The next morning was KSGJ to Providenciales (MBPV) for fuel. We didn’t need to clear customs for just a fuel stop, but they certainly tack on a number of government fees. From there we continued to St. Thomas (TIST). During my planning, I had been working with the FBOs and customs to make sure that I had everything set. As we were preparing to depart to St. Thomas, I gave one more call. It was lucky that I did. They said, you better hurry, customs goes home at 5:45 today. We landed in St. Thomas at 5:38 and had a really quick trip through customs. The FBO at St. Thomas (Standard Aviation) was great. They met us a customs and got us through everything quickly and easily. Things always work a little differently in the islands. From there, we spent 2 nights in St Thomas, which is still recovering from Hurricane Irma. On Monday, we took a ferry to Tortola where we picked up a sailboat for the next five nights. We had a fun captain and enjoyed sailing around the British Virgin Islands. The BVI were also hit very hard by the hurricane. They can certainly use the tourist dollars to help the recovery and support their economy and workers. Saturday morning was a ferry back to St. Thomas to pick up the plane. Saturday morning, the ferry and US Customs in in St. Thomas were running on island time. Getting a little later start than we wanted, we set off from TIST to MBPV again for fuel. ProvoAir at MBPV was very efficient and helpful. Even though you file your flight plan like normal through ForeFlight or your normal routine, the tower at MBPV requires a paper copy. The FBO helped get one faxed over to them and called to verify that got it and we happy. Another thing that I found interesting is that depending on the time of day, clearance delivery, ground, tower, and approach can all be on the same frequency with one controller. Because of the late start, we were not going to be able to make customs at Ft. Pierce before closing time at 6PM. We elected to choose Ft. Lauderdale Executive (KFXE) where customs are open until Midnight daily. After a dinner in Ft Lauderdale, we decided to call it a night and not push on any further. On Easter Sunday we got up and made the trip from KFXE to Charleston, SC (KCHS) for a nice Easter brunch in downtown Charleston. After brunch was the trip back to KBED. I dropped her off with her mother at around 6pm. Since I didn’t have anything scheduled Monday morning, I stayed in Boston Sunday night. On Monday, I woke up and flew back to KERI in time to make if for my surgeries that were scheduled to start at 10AM. It was a great Father-Daughter week. She is a big help with the plane and the logistics. She and I have done international flight to several places in Canada, but this was out first Caribbean adventure on our own. I think this really helps develop her self confidence and sense of adventure. She isn’t afraid to try new things and figure out new situations that require flexibility. I am very fortunate that she and I can do this sort of trip together. The Meridian was great for the trip. I love the speed and altitude. But is certainly doesn’t have the legs of a Mooney. The thirsty PT6 needs to eat every 800nm or about 3 hours. It is almost impossible to take a bad picture with this scenery. Bradb

It’s similar to this

>>I asked him point blank how the TT integration is coming. Said he spoke with aspen last week and the heading/barro is working between aspen and TT on their bench. Guessing it will be live by Oshkosh. Heard this on another forum.. Wondering … looks like they (TT And Aspen ) have stepped on the gas on this project? Nav

perhaps a simple and good suggestion.... btw i love your term @jaylw314 "knobology" is my new word of the day and could not be more true as it relates to the 530w

Just be prepared to counter the AMU spent with some JMU.

Maybe its your transponder changing output :-)

Recap please regarding txi and gtn.

Get your wallets out boys! And just hand them over to Garmin.

Not any more. https://www.eia.gov/todayinenergy/detail.php?id=37053

The problem is the 100° countersink. Most non-aviation screws are 82°. 4-40 screws are skinny and very easy to cut with a common crimping tool. After that, you can use it as a crimper, to boot.

I wrote my own from my Owners Manual and printed it out in both sides (using my single-sided printer) from Word, after searching Help and "printing like a pamphlet" or something similar. Booklet printing! That gave me enough blank pages to retype most of the Performance Charts (skipping things below 2300 and above 2600) so I don't have to flip fragile brown pages in every flight. A quick pamphlet stitch down the middle after soft laminating, and it's been working for 12 years. Sorry for the glare, it's still way dark and the wife's still asleep . . . .

Mine is so tight that I think I could pressurize the cabin.

That is an idea, but my day job involves working in a native linux environment. I've gotten used to being antiquated. That's why I fly a 1967 airplane!!!

Why not do them like the fuel tank plates so they are smooth flush. two layers of alum.

https://mooneyspace.com/topic/5293-lets-talk-lubrication/

I am a professional pilot (corporate aviation) and a GA pilot. Many times you get hazed with unknown service charges in both fields. Where ever you land, what's the catch ? The one thing I do not need is a "mistake" with the Federal rules and if something makes it easier for me to escape that mistake, I''ll pay that premium. Regardless make and model you fly, the border crossing rules apply to all. I didn't create the App, or know the developer. I saw this software for the first time and Sun and Fun and I was amazed by the simplicity and convenience of the iPhone use. When I was flying people from South Florida to the Bahamas and back I spent many hours behind old windows computers trying to enter all that data and waiting for a CBP's reply for an ok. And on the return legs into South Florida if there were any additions or changes you were back at square one on filing and waiting. This new App for me is a blessing to take away the stress/time, if I just could get my grey hairs to return to the Original - pre CBP antics - color. My post was a mere suggestion. Thanks

Flew down to Houston for a wedding Friday. Flew from SGR to NEW Saturday to say hello to a friend. Over Galleria in Houston / Transco Tower Crossing over Lake Pontchartrain It was so cool landing over the water Nice Sunset Reflection Sunday was a bit more chaotic. Got lunch with my sister who was in NOLA for a wedding. Had to non rev her back to DC so she wouldnt be considered AWOL from her Military leave. Well all flights to DCA were packed. Flew NEW-CSG (was going to drop her off in RDU and suffer through to night back to GPM.) Landed in CSG and looked at flights from HSV to DCA. It was open again, we turned North West to HSV from CSG. Got her on the ground with 40 minutes to go. She got her ticket, and walked on board! This was leaving HSV to TXK Texarkana for a fuel stop before continuing to GPM. 51kt cross wind from the south before turning to final at GPM. LONG flight back from HSV to GPM. Total for the weekend: 12.6 Hours Total on Sunday alone: 8.6 Hours

I would dimple them, but then again it might just be an excuse to buy the dimples dies

A valid point, but not really that incredible. How much did your first home PC cost? How much would it be worth today?

Hi all. My plane has been in the shop for the annual and CiES senders and I have been working my tail off, so have not been here much. %HP when LOP is fuel flow in GPH x 13.7 divided by rated HP (210 for the 231). Everyone should know that by now. The JPI uses that formula when LOP, or at least that is the way it appears to me. I saw some posts wondering how you know you are actually LOP. Using the JPI’s you can’t start on the rich side, pull everything over to the LOP side, and expect to have a good “degrees lean of peak” reading because in the 231 too many things are moving around. In the aircraft that control MP so it is constant when fuel flow is reduced that is possible, but in the 231 a change to MP changes fuel flow and vice versa, so by the time you get from the ROP side to the LOP side everything has changed and the peak reading you got is no longer valid. The one way to do it and get a decent number is to get the engine running on the LOP side for sure, say 10 GPH and 32-34”, and then use the JPI in Rich of Peak leaning mode to enrich to peak and back. Rich of Peak mode does not actually know whether you are rich or lean of peak. It is JPI’s way of determining peak by measuring the first cylinder to peak, and if you are already on the lean side and enriching back to peak, that is what you want. Then when you lean back again, you are measuring degrees from peak by the cylinder that is closest to peak, making sure all the rest are further away. This is still not perfect, because as I said, when you make a change to fuel flow or MP in the 231, it changes other things. But it is reasonably accurate. Once you are confident you know what a good LOP setting is, then just use MP and FF to make it again the next time, its simpler.

Not so much hate, some like the feeling of not having to bend over

Seriously, dude, how much is Garmin paying you? Or if you actually do work for them, at least let us know your position in the company. I'm going to expect a healthy discount when I order a Garmin product.

Before he died, Gordon Baxter had a great story about this concept. When he was interviewing Al Mooney in preparation for writing The Al Mooney Story, Al sketched the tail of the M18 and M20 at high angles of attack. The important concept wasn't so much the leading edge of the stabilizer, but the swept forward hinge line of the control surface. As Skip described, the swept tail is largely wasted because what's important is the perpendicular component of the relative wind. Gordon said that Al sketched something like this:

I also have AeroComfort yoke covers. They are not cheap, but Hector is the man and it really makes a difference in comfort and style. They also wrapped my glareshield which took garbage looking plastic and made it look much more luxurious.

Brad - she is growing up in a hurry! I remember you posting pictures of her in your Acclaim. Sent from my iPad using Tapatalk Pro

Flying in SOCAL has some nice views... taken on 19 April, 2019.

We finally had the rain move out on the east coast. Climbed on top to get above a lower layer. Clear enough to see Philly from a distance. Zoomed in to get a better look. Sent from my iPad using Tapatalk Pro

Wet, wet, wet, yep finally got my IR wet today climbing out of Troutdale enroute to Sunriver. I could of flown the gorge to The Dalles all VFR. But what’s the joy in seeing where you’re going??? It wasn’t a lot of IMC. Bases at 4,100 tops 6,300 on climb out. So almost got 5 minutes, that’s good for five tents right??? Sent from my iPhone using Tapatalk

I do not know. I guess shipping for TKS fluid for your de-iced airplane is a first world problem ?? Jk

Good god that thing takes a case of oil? I get two oil changes out of a case.

I see $99 case AS W100. I have to drive across town, but I think I pay $78/case I also happen to live in the energy capital of the world.

I dunno. I may be getting my haircut that Friday. Can you move it back one more week?