201guy Posted August 27, 2016 Report Share Posted August 27, 2016 Looking for a set of gear tools or a compressor to service the gear pucks/donuts. Carl 281-799-8487 Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 27, 2016 Report Share Posted August 27, 2016 Carl, Consider this... http://www.gdsaero.com/vintage-airworks/ from the Mooney guy that builds airplane related tools and has the cowling project underway... Best regards, -a- -------------- If you're in need of Mooney gear preload tools, GDS Aero has new manufacture sets in stock. Price is $245 for the set. Contact David via e-mail at info@gdsaero.com. Website www.gdsaero.com. Thank you, David Quote Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 27, 2016 Report Share Posted August 27, 2016 Your right Jim, my bad.... I was too quick on the trigger. See if this is any help... It includes where to rent and some tools others have built. Best regards, -a- Quote Link to comment Share on other sites More sharing options...
jetdriven Posted August 28, 2016 Report Share Posted August 28, 2016 I rented the GDS kit and it's a superior took than then jack screw factory tool. Quote Link to comment Share on other sites More sharing options...
Sabremech Posted September 1, 2016 Report Share Posted September 1, 2016 Like Jetdriven posted previously, I have a set of gear donut tools I'll rent out. They are hydraulic so it makes it much less effort to compress than the factory tools. I haven't made them to sell as I think it would be too costly for most people. Thanks, David Staffeldt GDS Aero Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 1, 2016 Report Share Posted September 1, 2016 1 hour ago, Sabremech said: Like Jetdriven posted previously, I have a set of gear donut tools I'll rent out. They are hydraulic so it makes it much less effort to compress than the factory tools. I haven't made them to sell as I think it would be too costly for most people. Thanks, David Staffeldt GDS Aero And besides, you need to finish that cowl mod you are working on for us! 1 Quote Link to comment Share on other sites More sharing options...
Guitarmaster Posted September 1, 2016 Report Share Posted September 1, 2016 1 hour ago, Sabremech said: Like Jetdriven posted previously, I have a set of gear donut tools I'll rent out. They are hydraulic so it makes it much less effort to compress than the factory tools. I haven't made them to sell as I think it would be too costly for most people. Thanks, David Staffeldt GDS Aero And besides, you need to finish that cowl mod you are working on for us! Yes. Chop, chop!! Sent from my iPad using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Sabremech Posted September 1, 2016 Report Share Posted September 1, 2016 6 minutes ago, Guitarmaster said: Yes. Chop, chop!! Sent from my iPad using Tapatalk You guys are killing me. How do I get any beer drinking time if I'm only working on the cowling mod? 2 Quote Link to comment Share on other sites More sharing options...
Guitarmaster Posted September 1, 2016 Report Share Posted September 1, 2016 I'll bring you some beer! I need to burn my tanks down prior to the EDM install this week. Sent from my iPad using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.