Jump to content

stormscope antenna location M20E


Scopes

Recommended Posts

Question for any M20E owners with stormscope - where did you locate the antenna and did you have skinmapping done? I bought an old WX900 and am trying to get it installed but running into issue as there is no skinmapping device available at any avionics shop in my area.  I was thinking about mounting under the tail in the current location of the strobe, and removing the strobe by replacing with aveo wingtip LED strobes (I know, that's an entirely different topic).  If there is consensus on location which consistently has mapped out as a good spot, I will try it there.

Thanks

Joel

1964 M20E

Link to comment
Share on other sites

It's pretty quiet aft of the battery on the belly skin. Mine is about 5" behind the last belly panel. I tried putting it rearmost belly panel but any charge current over 20 amps triggered the wx-1000 to inhibit the antenna.

Link to comment
Share on other sites

Question for any M20E owners with stormscope - where did you locate the antenna and did you have skinmapping done? I bought an old WX900 and am trying to get it installed but running into issue as there is no skinmapping device available at any avionics shop in my area.  I was thinking about mounting under the tail in the current location of the strobe, and removing the strobe by replacing with aveo wingtip LED strobes (I know, that's an entirely different topic).  If there is consensus on location which consistently has mapped out as a good spot, I will try it there.

Thanks

Joel

1964 M20E

Personally, I believe that a stormscope is a very valuable tool, but I would not install one on any airplane without skinmapping the particular airframe. Have you checked to see if your avionics shop could borrow or rent the skinmapping equipment? The additional cost would be well worth it.

Link to comment
Share on other sites

You might be wise to go ahead and install the display and processor, and make sure you have all of the hardware for the antenna installation (doubler, screws, etc.) and fly to a different shop with the proper equipment.  That way you can likely get it installed while you wait if you coordinate in advance.

Link to comment
Share on other sites

In my previous M20J, I installed the Stormscope antenna just aft of the small round inspection cover that is half way to the empennage. It needs to be several feet from the battery and other stuff in the avionics bay. I didn't skin map and did the installation myself. It wasn't too difficult and worked great. Lee

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.