N207LS

I have been happy with the reseal from Wet Wingologists at KFXE. Work is good and Edison was a fair and honest person to deal with. I am almost 3 years with no leaks... Maybe a good vacation to visit South Florida and have the work done while you enjoy the beach...

I have not done my interior yet, but based on my paint work, Tejas is the only shop that I will let do it... These guys are real pros. If my interior is 1/2 as good as my paint job, I'll be more than elated... Take a look at my photos and you will see my paint work. Best of luck...

I too have the retractable step and love the simplicity of it. I did have to replace the tubing to is as mine was deteriorating (found two annuals ago). Relatively minimal work... The easiest way to check if it is retracting is to simply to start up and have someone watch it before climbing in the plane (please no comments about climbing into an aircraft while it is running, I understand the issues, however have been doing this for some time, just be extra careful when you do it...). I can not understand why Mooney stopped using this design. It is simple, easy to maintain, adds a few MPH, and weighs little. I guess that is why they call it progress?

I did all of my instrument training in my G model with a working wing leveler (on during my Checkride). Like you describe, my finger naturally holds the button down during takeoff and landings. My examiner had lots of vintage Mooney time and used to train in fixed gear Mooneys. He also showed me a better way to maneuver the manual gear (by hilding my hand upside down and engaging the button with the palm (lower left hand ball of my hand), to be able to swim the bar to retract the gear in one fluid motion taking about 1.5 seconds to fully retract the gear and ger your hand back on the throttle during initial climb. Also, I had a working ADF and a non-approach certified GPS at the time, so I was lucky enough to have to perform an NDB approach in actual conditions. Enjoy your training and the learning process of instrument flying.

here is mine, redone in 2009

Congratulations, she is adorable! Let us all know about her first flight! Personally, I did my first flight in my father's Mooney (a 1969 C model N9214V) when I was just over 2 months old (late February 1971). I have great memories of flying accross the US in our Mooney and ultimately it was the driving force for me to buy mine... Aaron

I echo Hank's starting advice from MAPA... My G (O-360) has only been in cold weather a few times. Being based in Florida we rarely have to think about cold start procedures, but a couple of weeks ago it was in the 40's here and the cold start procedure was essential. As far as hot starts go, I have not had any issue as long as you do not leave the fuel pump on and do not pump the throttle. On the other hand, your symptoms sound like a possible voltage regulator issue (given that the ammeter never went back to zero). Take a look at your aircraft log book and see how old your voltage regulator is. When I had a similar issue I found out that it was my voltage regulator. With a little detective work in the log books, I also found out that it had never been changed and it was original to 1968. I guess that you can't complain about a electrical part that is 35 years old and finally breaks. It's a fairly cheap part from Aircraft Spruce and takes just a few minutes to change. Aaron

Brooksville is north of Tampa and not on the water, one of the better spots around here for minimal salt air climate. Add to that a hangar and much better! As far as a prop strike inspection goes, it is just that an inspection. You will most likely get a lot of opinions on this one, but I am in the camp of buying airplanes with NDH. I know that planes, like cars, can be repaired properly, but I prefer to buy an airplane that has no damage history. Check the logs thoroughly to see what other repairs were made at the time of the prop strike. I would also make sure to find out the cause of the prop strike. Best of luck. I would also suggest a thorough pre-buy on any airplane. Aaron

Do you know what airport in Tampa and how long in the hangar there? I live in St. Petersburg, FL and there are better and worse airports to hanagar a plane, as far as salt air conditions go. All of the air here is "salty" but there are 4 airports that are literally on Tampa Bay and completely subject to much worse salt conditions than some others in the area. The four airports with a large GA presence that are directly on the bay are Albert Whitted, St Pete-Clearwater International, Peter O. Knight, and Airport Manatee. At any of these 4 airports the plane would be subjected to much worse salt conditions than if at one of the others further inland. Hope this helps. Aaron

My wife and I fly down there regularly. It is only about 1 hr 40 mins for me. Let me know what you are looking for and I'll be happy to help out. I have been going there for years... My Favorite Hotel... Santa Maria Suites (beautiful big modern suites) or La Concha (best location in town) Restaurants... Louies Backyard (nicest restaurant on the island with amazing beachfront location, but pricey), Michaels (nice fine dining), Blue Heaven (breakfast), and Blonde Giraffe (the best Key Lime Pie on a stick) Bars... Tons to choose from, but don't miss sunset from the rooftop bar at La Concha... It is hard not to have fun in Key West... Flying into Key West is easy. The only FBO is Island City Flying Service and they work out of a small building on the ramp. All you do is taxi up and they will park you and tow your plane to a tie down. Once inside, just ask them to call you a cab to town. No need to rent a car as parking in key west is a HUGE hassle. You can walk the whole town while you are there. Nothing is cheap in Key West including avgas. Also, I would suggest that you take a low (1000') or lower flight up the keys. It is absolutely beautiful. It is worth a lunch stop in Marathon to go to the Island Tiki (try their famous Deep Fried Key Lime Pie for dessert) (they have much cheaper 100LL than Key West, so top off there). Just make sure that you fly along the south east side of the islands to remain clear of the 10,000' Fixed Balloon just North of Key West and on the Northwest side of Hwy 1. Feel free to PM me for additional information. Have a great trip... Aaron

I have a couple of good photos on my gallery, N207LS, then Tejas Aero Services folder. My cowl has had the washers in place since I bought the plane. They are the dimple washers on all 4 screws. I assumed that it was how it came originally. I did not do the mod, as it was done by the former owner. The only prolem that I did have was some cracking issues (that are now all corrected since the paint job and fiberglass work from the back side of the mod). Sorry that I couldn't be more help. Aaron

Congrats. Now that you have the ticket, I suggest that you use it as much as the sunny Hawaiian islands allow. The more that you use it, the better you are at it. Now that it is all fresh, focus on staying not just current, but truly proficient. Best of luck! Aaron

I have the ARI mod on my 68 G. This does make it look a lot more like a 201 cowl than the others that only close one side. My mod was done when I bought the plane, so I am not sure of his actual cost (with installation). The only drawback is that it is fiberglass and with time had a few cracks. When I had the plane repainted, we did all of the fiberglass repairs from the back side. It is now crack free and I hope that it stays that way. There are pics of the mod in my gallery. Best of luck Aaron

It sounds like you are going through the right process. I echo the sentiments of the F crew. I can also assure you that my G is as fast as many F's (powerflow & all the speed mods). I cruise at 140kts at 5,000', no wind, 23" and 2300 RPM. I also burn arund 8.7-8.9 GPH at that setting (taken off my fuel flow analyzer). If you back the power off 130 kts at 19" and 2300 RPM and burn 7 GPH. I know that most people on this board fly at much higher power settings, but it depends on how much $$ you want to spend and why you are flying (if I am on a long trip and need to get there then 23 squared, if I am Sunday flying then 19"/2300 rpm). Just a thought, but if you consider a slightly older airframe, you will most likely get a lot of extra toys for the money (430 or 530W, panel upgrades, etc). Regardless of which Mooney you choose you will be happy with the performance. There are also some old posts on things to look for. I really suggest that you dig them up. I don't want to rehash everything here, but in the current economy, you will find the plane that you want if you keep looking... Regardless of your choice of Mooney make sure that the big ticket items are in good working order... Best of luck. Aaron

MOA is based in Nokomis, FL (Venice, FL) and features lots of articles by Coy Jacobs. Read into this as you will, but Coy is the owner of Mooney Mart and MOA appears to be nothing more than a vehicle for them. There are some interesting articles in their old magazines, but always some unwritten ads for Mooney Mart... I am not sure that there is much substance beyond that. MAPA seemsRealize that this is only one persons opinion though. Aaron